/**
******************************************************************************
* @file stm32f4xx_dfsdm.c
* @author MCD Application Team
* @version V1.8.1
* @date 27-January-2022
* @brief This file provides firmware functions to manage the following
* functionalities of Digital Filter for Sigma Delta modulator
* (DFSDM) peripheral:
* + Initialization functions.
* + Configuration functions.
* + Interrupts and flags management functions.
*
* @verbatim
*
================================================================================
##### How to use this driver #####
================================================================================
[..]
@endverbatim
******************************************************************************
* @attention
*
* Copyright (c) 2016 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "stm32f4xx_dfsdm.h"
#include "stm32f4xx_rcc.h"
/** @addtogroup STM32F4xx_StdPeriph_Driver
* @{
*/
/** @defgroup DFSDM
* @brief DFSDM driver modules
* @{
*/
#if defined(STM32F412xG) || defined(STM32F413_423xx)
/* External variables --------------------------------------------------------*/
/* Private typedef -----------------------------------------------------------*/
/* Private defines -----------------------------------------------------------*/
#define CHCFGR_INIT_CLEAR_MASK (uint32_t) 0xFFFE0F10
/* Private macros ------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private function prototypes -----------------------------------------------*/
/* Private functions ---------------------------------------------------------*/
/** @defgroup DFSDM_Private_Functions
* @{
*/
/** @defgroup DFSDM_Group1 Initialization functions
* @brief Initialization functions
*
@verbatim
===============================================================================
Initialization functions
===============================================================================
This section provides functions allowing to:
- Deinitialize the DFSDM
- Initialize DFSDM serial channels transceiver
- Initialize DFSDM filter
@endverbatim
* @{
*/
/**
* @brief Deinitializes the DFSDM peripheral registers to their default reset values.
* @param None.
* @retval None.
*
*/
void DFSDM_DeInit(void)
{
/* Enable LPTx reset state */
RCC_APB2PeriphResetCmd(RCC_APB2Periph_DFSDM1, ENABLE);
RCC_APB2PeriphResetCmd(RCC_APB2Periph_DFSDM1, DISABLE);
#if defined(STM32F413_423xx)
RCC_APB2PeriphResetCmd(RCC_APB2Periph_DFSDM2, ENABLE);
RCC_APB2PeriphResetCmd(RCC_APB2Periph_DFSDM2, DISABLE);
#endif /* STM32F413_423xx */
}
/**
* @brief Initializes the DFSDM serial channels transceiver according to the specified
* parameters in the DFSDM_TransceiverInit.
* @param DFSDM_Channelx: specifies the channel to be selected.
* This parameter can be one of the following values :
* @arg DFSDM1_Channel0 : DFSDM 1 Channel 0
* @arg DFSDM1_Channel1 : DFSDM 1 Channel 1
* @arg DFSDM1_Channel2 : DFSDM 1 Channel 2
* @arg DFSDM1_Channel3 : DFSDM 1 Channel 3
* @arg DFSDM2_Channel0 : DFSDM 2 Channel 0 (available only for STM32F413_423xx devices)
* @arg DFSDM2_Channel1 : DFSDM 2 Channel 1 (available only for STM32F413_423xx devices)
* @arg DFSDM2_Channel2 : DFSDM 2 Channel 2 (available only for STM32F413_423xx devices)
* @arg DFSDM2_Channel3 : DFSDM 2 Channel 3 (available only for STM32F413_423xx devices)
* @arg DFSDM2_Channel4 : DFSDM 2 Channel 4 (available only for STM32F413_423xx devices)
* @arg DFSDM2_Channel5 : DFSDM 2 Channel 5 (available only for STM32F413_423xx devices)
* @arg DFSDM2_Channel6 : DFSDM 2 Channel 6 (available only for STM32F413_423xx devices)
* @arg DFSDM2_Channel7 : DFSDM 2 Channel 7 (available only for STM32F413_423xx devices)
* @param DFSDM_TransceiverInitStruct: pointer to a DFSDM_TransceiverInitTypeDef structure
* that contains the configuration information for the specified channel.
* @retval None
* @note It is mandatory to disable the selected channel to use this function.
*/
void DFSDM_TransceiverInit(DFSDM_Channel_TypeDef* DFSDM_Channelx, DFSDM_TransceiverInitTypeDef* DFSDM_TransceiverInitStruct)
{
uint32_t tmpreg1 = 0;
uint32_t tmpreg2 = 0;
/* Check the parameters */
assert_param(IS_DFSDM_ALL_CHANNEL(DFSDM_Channelx));
assert_param(IS_DFSDM_INTERFACE(DFSDM_TransceiverInitStruct->DFSDM_Interface));
assert_param(IS_DFSDM_Input_MODE(DFSDM_TransceiverInitStruct->DFSDM_Input));
assert_param(IS_DFSDM_Redirection_STATE(DFSDM_TransceiverInitStruct->DFSDM_Redirection));
assert_param(IS_DFSDM_PACK_MODE(DFSDM_TransceiverInitStruct->DFSDM_PackingMode));
assert_param(IS_DFSDM_CLOCK(DFSDM_TransceiverInitStruct->DFSDM_Clock));
assert_param(IS_DFSDM_DATA_RIGHT_BIT_SHIFT(DFSDM_TransceiverInitStruct->DFSDM_DataRightShift));
assert_param(IS_DFSDM_OFFSET(DFSDM_TransceiverInitStruct->DFSDM_Offset));
assert_param(IS_DFSDM_CLK_DETECTOR_STATE(DFSDM_TransceiverInitStruct->DFSDM_CLKAbsenceDetector));
assert_param(IS_DFSDM_SC_DETECTOR_STATE(DFSDM_TransceiverInitStruct->DFSDM_ShortCircuitDetector));
/* Get the DFSDM Channelx CHCFGR1 value */
tmpreg1 = DFSDM_Channelx->CHCFGR1;
/* Clear SITP, CKABEN, SCDEN and SPICKSEL bits */
tmpreg1 &= CHCFGR_INIT_CLEAR_MASK;
/* Set or Reset SITP bits according to DFSDM_Interface value */
/* Set or Reset SPICKSEL bits according to DFSDM_Clock value */
/* Set or Reset DATMPX bits according to DFSDM_InputMode value */
/* Set or Reset CHINSEL bits according to DFSDM_Redirection value */
/* Set or Reset DATPACK bits according to DFSDM_PackingMode value */
/* Set or Reset CKABEN bit according to DFSDM_CLKAbsenceDetector value */
/* Set or Reset SCDEN bit according to DFSDM_ShortCircuitDetector value */
tmpreg1 |= (DFSDM_TransceiverInitStruct->DFSDM_Interface |
DFSDM_TransceiverInitStruct->DFSDM_Clock |
DFSDM_TransceiverInitStruct->DFSDM_Input |
DFSDM_TransceiverInitStruct->DFSDM_Redirection |
DFSDM_TransceiverInitStruct->DFSDM_PackingMode |
DFSDM_TransceiverInitStruct->DFSDM_CLKAbsenceDetector |
DFSDM_TransceiverInitStruct->DFSDM_ShortCircuitDetector);
/* Write to DFSDM Channelx CHCFGR1R */
DFSDM_Channelx->CHCFGR1 = tmpreg1;
/* Get the DFSDM Channelx CHCFGR2 value */
tmpreg2 = DFSDM_Channelx->CHCFGR2;
/* Clear DTRBS and OFFSET bits */
tmpreg2 &= ~(DFSDM_CHCFGR2_DTRBS | DFSDM_CHCFGR2_OFFSET);
/* Set or Reset DTRBS bits according to DFSDM_DataRightShift value */
/* Set or Reset OFFSET bits according to DFSDM_Offset value */
tmpreg2 |= (((DFSDM_TransceiverInitStruct->DFSDM_DataRightShift) <<3 ) |
((DFSDM_TransceiverInitStruct->DFSDM_Offset) <<8 ));
/* Write to DFSDM Channelx CHCFGR1R */
DFSDM_Channelx->CHCFGR2 = tmpreg2;
}
/**
* @brief Fills each DFSDM_TransceiverInitStruct member with its default value.
* @param DFSDM_TransceiverInitStruct : pointer to a DFSDM_TransceiverInitTypeDef structure
* which will be initialized.
* @retval None
*/
void DFSDM_TransceiverStructInit(DFSDM_TransceiverInitTypeDef* DFSDM_TransceiverInitStruct)
{
/* SPI with rising edge to strobe data is selected as default serial interface */
DFSDM_TransceiverInitStruct->DFSDM_Interface = DFSDM_Interface_SPI_FallingEdge;
/* Clock coming from internal DFSDM_CKOUT output is selected as default serial clock */
DFSDM_TransceiverInitStruct->DFSDM_Clock = DFSDM_Clock_Internal;
/* No data right bit-shift is selected as default data right bit-shift */
DFSDM_TransceiverInitStruct->DFSDM_DataRightShift = 0x0;
/* No offset is selected as default offset */
DFSDM_TransceiverInitStruct->DFSDM_Offset = 0x0;
/* Clock Absence Detector is Enabled as default state */
DFSDM_TransceiverInitStruct->DFSDM_CLKAbsenceDetector = DFSDM_CLKAbsenceDetector_Enable;
}
/**
* @brief Initializes the DFSDMx Filter according to the specified
* parameters in the DFSDM_FilterInitStruct.
* @param DFSDMx: specifies the filter to be selected :
* This parameter can be one of the following values :
* @arg DFSDM1_0 : DFSDM 1 Filter 0
* @arg DFSDM1_1 : DFSDM 1 Filter 1
* @arg DFSDM2_0 : DFSDM 2 Filter 0 (available only for STM32F413_423xx devices)
* @arg DFSDM2_1 : DFSDM 2 Filter 1 (available only for STM32F413_423xx devices)
* @arg DFSDM2_2 : DFSDM 2 Filter 2 (available only for STM32F413_423xx devices)
* @arg DFSDM2_3 : DFSDM 2 Filter 3 (available only for STM32F413_423xx devices)
* @param DFSDM_FilterInitStruct: pointer to a DFSDM_FilterInitTypeDef structure
* that contains the configuration information for the specified filter.
* @retval None
*
* @note It is mandatory to disable the selected filter to use this function.
*/
void DFSDM_FilterInit(DFSDM_Filter_TypeDef* DFSDMx, DFSDM_FilterInitTypeDef* DFSDM_FilterInitStruct)
{
uint32_t tmpreg1 = 0;
/* Check the parameters */
assert_param(IS_DFSDM_ALL_FILTER(DFSDMx));
assert_param(IS_DFSDM_SINC_ORDER(DFSDM_FilterInitStruct->DFSDM_SincOrder));
assert_param(IS_DFSDM_SINC_OVRSMPL_RATIO(DFSDM_FilterInitStruct->DFSDM_FilterOversamplingRatio));
assert_param(IS_DFSDM_INTG_OVRSMPL_RATIO(DFSDM_FilterInitStruct->DFSDM_IntegratorOversamplingRatio));
/* Get the DFSDMx FCR value */
tmpreg1 = DFSDMx->FLTFCR;
/* Clear FORD, FOSR and IOSR bits */
tmpreg1 &= ~(DFSDM_FLTFCR_FORD | DFSDM_FLTFCR_FOSR | DFSDM_FLTFCR_IOSR);
/* Set or Reset FORD bits according to DFSDM_SincOrder value */
/* Set or Reset FOSR bits according to DFSDM_FilterOversamplingRatio value */
/* Set or Reset IOSR bits according to DFSDM_IntegratorOversamplingRatio value */
tmpreg1 |= (DFSDM_FilterInitStruct->DFSDM_SincOrder |
((DFSDM_FilterInitStruct->DFSDM_FilterOversamplingRatio -1) << 16) |
(DFSDM_FilterInitStruct->DFSDM_IntegratorOversamplingRatio -1));
/* Write to DFSDMx FCR */
DFSDMx->FLTFCR = tmpreg1;
}
/**
* @brief Fills each DFSDM_FilterInitStruct member with its default value.
* @param DFSDM_FilterInitStruct: pointer to a DFSDM_FilterInitTypeDef structure
* which will be initialized.
* @retval None
*/
void DFSDM_FilterStructInit(DFSDM_FilterInitTypeDef* DFSDM_FilterInitStruct)
{
/* Order = 3 is selected as default sinc order */
DFSDM_FilterInitStruct->DFSDM_SincOrder = DFSDM_SincOrder_Sinc3;
/* Ratio = 64 is selected as default oversampling ratio */
DFSDM_FilterInitStruct->DFSDM_FilterOversamplingRatio = 64 ;
/* Ratio = 4 is selected as default integrator oversampling ratio */
DFSDM_FilterInitStruct->DFSDM_IntegratorOversamplingRatio = 4;
}
/**
* @}
*/
/** @defgroup DFSDM_Group2 Configuration functions
* @brief Configuration functions
*
@verbatim
===============================================================================
Configuration functions
===============================================================================
This section provides functions allowing to configure DFSDM:
- Enable/Disable (DFSDM peripheral, Channel, Filter)
- Configure Clock output
- Configure Injected/Regular channels for Conversion
- Configure short circuit detector
- Configure Analog watchdog filter
@endverbatim
* @{
*/
#if defined(STM32F412xG)
/**
* @brief Enables or disables the DFSDM peripheral.
* @param NewState: new state of the DFSDM interface.
* This parameter can be: ENABLE or DISABLE.
* @retval None
*/
void DFSDM_Command(FunctionalState NewState)
{
/* Check the parameters */
assert_param(IS_FUNCTIONAL_STATE(NewState));
if (NewState != DISABLE)
{
/* Set the ENABLE bit */
DFSDM1_Channel0 -> CHCFGR1 |= DFSDM_CHCFGR1_DFSDMEN;
}
else
{
/* Reset the ENABLE bit */
DFSDM1_Channel0 -> CHCFGR1 &= ~(DFSDM_CHCFGR1_DFSDMEN);
}
}
#endif /* STM32F412xG */
#if defined(STM32F413_423xx)
/**
* @brief Enables or disables the DFSDM peripheral.
* @param Instance: select the instance of DFSDM
* This parameter can be: 1 or 2.
* @param NewState: new state of the DFSDM interface.
* This parameter can be: ENABLE or DISABLE.
* @retval None
*/
void DFSDM_Cmd(uint32_t Instance, FunctionalState NewState)
{
/* Check the parameters */
assert_param(IS_FUNCTIONAL_STATE(NewState));
if(Instance == 1)
{
if (NewState != DISABLE)
{
/* Set the ENABLE bit */
DFSDM1_Channel0 -> CHCFGR1 |= DFSDM_CHCFGR1_DFSDMEN;
}
else
{
/* Reset the ENABLE bit */
DFSDM1_Channel0 -> CHCFGR1 &= ~(DFSDM_CHCFGR1_DFSDMEN);
}
}
else /* DFSDM2 */
{
if (NewState != DISABLE)
{
/* Set the ENABLE bit */
DFSDM2_Channel0 -> CHCFGR1 |= DFSDM_CHCFGR1_DFSDMEN;
}
else
{
/* Reset the ENABLE bit */
DFSDM2_Channel0 -> CHCFGR1 &= ~(DFSDM_CHCFGR1_DFSDMEN);
}
}
}
#endif /* STM32F413_423xx */
/**
* @brief Enables or disables the specified DFSDM serial channelx.
* @param DFSDM_Channelx: specifies the channel to be selected.
* This parameter can be one of the following values :
* @arg DFSDM1_Channel0 : DFSDM 1 Channel 0
* @arg DFSDM1_Channel1 : DFSDM 1 Channel 1
* @arg DFSDM1_Channel2 : DFSDM 1 Channel 2
* @arg DFSDM1_Channel3 : DFSDM 1 Channel 3
* @arg DFSDM2_Channel0 : DFSDM 2 Channel 0 (available only for STM32F413_423xx devices)
* @arg DFSDM2_Channel1 : DFSDM 2 Channel 1 (available only for STM32F413_423xx devices)
* @arg DFSDM2_Channel2 : DFSDM 2 Channel 2 (available only for STM32F413_423xx devices)
* @arg DFSDM2_Channel3 : DFSDM 2 Channel 3 (available only for STM32F413_423xx devices)
* @arg DFSDM2_Channel4 : DFSDM 2 Channel 4 (available only for STM32F413_423xx devices)
* @arg DFSDM2_Channel5 : DFSDM 2 Channel 5 (available only for STM32F413_423xx devices)
* @arg DFSDM2_Channel6 : DFSDM 2 Channel 6 (available only for STM32F413_423xx devices)
* @arg DFSDM2_Channel7 : DFSDM 2 Channel 7 (available only for STM32F413_423xx devices)
* @param NewState: new state of the DFSDM serial channelx .
* This parameter can be: ENABLE or DISABLE.
* @retval None
*/
void DFSDM_ChannelCmd(DFSDM_Channel_TypeDef* DFSDM_Channelx, FunctionalState NewState)
{
/* Check the parameters */
assert_param(IS_DFSDM_ALL_CHANNEL(DFSDM_Channelx));
assert_param(IS_FUNCTIONAL_STATE(NewState));
if (NewState != DISABLE)
{
/* Set the ENABLE bit */
DFSDM_Channelx->CHCFGR1 |= DFSDM_CHCFGR1_CHEN;
}
else
{
/* Reset the ENABLE bit */
DFSDM_Channelx->CHCFGR1 &= ~(DFSDM_CHCFGR1_CHEN);
}
}
/**
* @brief Enables or disables the specified DFSDMx Filter.
* @param DFSDMx: specifies the filter to be selected :
* This parameter can be one of the following values :
* @arg DFSDM1_0 : DFSDM 1 Filter 0
* @arg DFSDM1_1 : DFSDM 1 Filter 1
* @arg DFSDM2_0 : DFSDM 2 Filter 0 (available only for STM32F413_423xx devices)
* @arg DFSDM2_1 : DFSDM 2 Filter 1 (available only for STM32F413_423xx devices)
* @arg DFSDM2_2 : DFSDM 2 Filter 2 (available only for STM32F413_423xx devices)
* @arg DFSDM2_3 : DFSDM 2 Filter 3 (available only for STM32F413_423xx devices)
* @param NewState: new state of the selected DFSDM module.
* This parameter can be: ENABLE or DISABLE.
* @retval None
*/
void DFSDM_FilterCmd(DFSDM_Filter_TypeDef* DFSDMx, FunctionalState NewState)
{
/* Check the parameters */
assert_param(IS_DFSDM_ALL_FILTER(DFSDMx));
assert_param(IS_FUNCTIONAL_STATE(NewState));
if (NewState != DISABLE)
{
/* Set the ENABLE bit */
DFSDMx->FLTCR1 |= DFSDM_FLTCR1_DFEN;
}
else
{
/* Reset the ENABLE bit */
DFSDMx->FLTCR1 &= ~(DFSDM_FLTCR1_DFEN);
}
}
#if defined(STM32F412xG)
/**
* @brief Configures the Output serial clock divider.
* @param DFSDM_ClkOutDivision: Defines the divider for the output serial clock
* This parameter can be a value between 1 and 256.
* @retval None
* @note The output serial clock is stopped if the divider =1.
* By default the serial output clock is stopped.
*/
void DFSDM_ConfigClkOutputDivider(uint32_t DFSDM_ClkOutDivision)
{
uint32_t tmpreg1 = 0;
/* Check the parameters */
assert_param(IS_DFSDM_CLOCK_OUT_DIVIDER(DFSDM_ClkOutDivision));
/* Get the DFSDM_Channel0 CHCFGR1 value */
tmpreg1 = DFSDM1_Channel0 -> CHCFGR1;
/* Clear the CKOUTDIV bits */
tmpreg1 &= (uint32_t)(~DFSDM_CHCFGR1_CKOUTDIV);
/* Set or Reset the CKOUTDIV bits */
tmpreg1 |= (uint32_t)((DFSDM_ClkOutDivision - 1) << 16);
/* Write to DFSDM Channel0 CHCFGR1 */
DFSDM1_Channel0 -> CHCFGR1 = tmpreg1;
}
/**
* @brief Configures the Output serial clock source.
* @param DFSDM_ClkOutSource: Defines the divider for the output serial clock
* This parameter can be a value of:
* @arg DFSDM_ClkOutSource_SysClock
* @arg DFSDM_ClkOutSource_AudioClock
* @retval None
*/
void DFSDM_ConfigClkOutputSource(uint32_t DFSDM_ClkOutSource)
{
uint32_t tmpreg1 = 0;
/* Check the parameters */
assert_param(IS_DFSDM_CLOCK_OUT_SOURCE(DFSDM_ClkOutSource));
/* Get the DFSDM_Channel0 CHCFGR1 value */
tmpreg1 = DFSDM1_Channel0 -> CHCFGR1;
/* Clear the CKOUTSRC bit */
tmpreg1 &= ~(DFSDM_CHCFGR1_CKOUTSRC);
/* Set or Reset the CKOUTSRC bit */
tmpreg1 |= DFSDM_ClkOutSource;
/* Write to DFSDM Channel0 CHCFGR1 */
DFSDM1_Channel0 -> CHCFGR1 = tmpreg1;
}
#endif /* STM32F412xG */
#if defined(STM32F413_423xx)
/**
* @brief Configures the Output serial clock divider.
* @param Instance: select the instance of DFSDM
* This parameter can be: 1 or 2.
* @param DFSDM_ClkOutDivision: Defines the divider for the output serial clock
* This parameter can be a value between 1 and 256.
* @retval None
* @note The output serial clock is stopped if the divider =1.
* By default the serial output clock is stopped.
*/
void DFSDM_ConfigClkOutputDivider(uint32_t Instance, uint32_t DFSDM_ClkOutDivision)
{
uint32_t tmpreg1 = 0;
if(Instance == 1)
{
/* Check the parameters */
assert_param(IS_DFSDM_CLOCK_OUT_DIVIDER(DFSDM_ClkOutDivision));
/* Get the DFSDM_Channel0 CHCFGR1 value */
tmpreg1 = DFSDM1_Channel0 -> CHCFGR1;
/* Clear the CKOUTDIV bits */
tmpreg1 &= (uint32_t)(~DFSDM_CHCFGR1_CKOUTDIV);
/* Set or Reset the CKOUTDIV bits */
tmpreg1 |= (uint32_t)((DFSDM_ClkOutDivision - 1) << 16);
/* Write to DFSDM Channel0 CHCFGR1 */
DFSDM1_Channel0 -> CHCFGR1 = tmpreg1;
}
else /* DFSDM2 */
{
/* Check the parameters */
assert_param(IS_DFSDM_CLOCK_OUT_DIVIDER(DFSDM_ClkOutDivision));
/* Get the DFSDM_Channel0 CHCFGR1 value */
tmpreg1 = DFSDM2_Channel0 -> CHCFGR1;
/* Clear the CKOUTDIV bits */
tmpreg1 &= (uint32_t)(~DFSDM_CHCFGR1_CKOUTDIV);
/* Set or Reset the CKOUTDIV bits */
tmpreg1 |= (uint32_t)((DFSDM_ClkOutDivision - 1) << 16);
/* Write to DFSDM Channel0 CHCFGR1 */
DFSDM2_Channel0 -> CHCFGR1 = tmpreg1;
}
}
/**
* @brief Configures the Output serial clock source.
* @param Instance: select the instance of DFSDM
* This parameter can be: 1 or 2.
* @param DFSDM_ClkOutSource: Defines the divider for the output serial clock
* This parameter can be a value of:
* @arg DFSDM_ClkOutSource_SysClock
* @arg DFSDM_ClkOutSource_AudioClock
* @retval None
*/
void DFSDM_ConfigClkOutputSource(uint32_t Instance, uint32_t DFSDM_ClkOutSource)
{
uint32_t tmpreg1 = 0;
if(Instance == 1)
{
/* Check the parameters */
assert_param(IS_DFSDM_CLOCK_OUT_SOURCE(DFSDM_ClkOutSource));
/* Get the DFSDM_Channel0 CHCFGR1 value */
tmpreg1 = DFSDM1_Channel0 -> CHCFGR1;
/* Clear the CKOUTSRC bit */
tmpreg1 &= ~(DFSDM_CHCFGR1_CKOUTSRC);
/* Set or Reset the CKOUTSRC bit */
tmpreg1 |= DFSDM_ClkOutSource;
/* Write to DFSDM Channel0 CHCFGR1 */
DFSDM1_Channel0 -> CHCFGR1 = tmpreg1;
}
else /* DFSDM2 */
{
/* Check the parameters */
assert_param(IS_DFSDM_CLOCK_OUT_SOURCE(DFSDM_ClkOutSource));
/* Get the DFSDM_Channel0 CHCFGR1 value */
tmpreg1 = DFSDM2_Channel0 -> CHCFGR1;
/* Clear the CKOUTSRC bit */
tmpreg1 &= ~(DFSDM_CHCFGR1_CKOUTSRC);
/* Set or Reset the CKOUTSRC bit */
tmpreg1 |= DFSDM_ClkOutSource;
/* Write to DFSDM Channel0 CHCFGR1 */
DFSDM2_Channel0 -> CHCFGR1 = tmpreg1;
}
}
#endif /* STM32F413_423xx */
/**
* @brief Enables or disables the specified Break_i siganl to the specified DFSDM_Channelx.
* @param DFSDM_Channelx: specifies the channel to be selected.
* This parameter can be one of the following values :
* @arg DFSDM1_Channel0 : DFSDM 1 Channel 0
* @arg DFSDM1_Channel1 : DFSDM 1 Channel 1
* @arg DFSDM1_Channel2 : DFSDM 1 Channel 2
* @arg DFSDM1_Channel3 : DFSDM 1 Channel 3
* @arg DFSDM2_Channel0 : DFSDM 2 Channel 0 (available only for STM32F413_423xx devices)
* @arg DFSDM2_Channel1 : DFSDM 2 Channel 1 (available only for STM32F413_423xx devices)
* @arg DFSDM2_Channel2 : DFSDM 2 Channel 2 (available only for STM32F413_423xx devices)
* @arg DFSDM2_Channel3 : DFSDM 2 Channel 3 (available only for STM32F413_423xx devices)
* @arg DFSDM2_Channel4 : DFSDM 2 Channel 4 (available only for STM32F413_423xx devices)
* @arg DFSDM2_Channel5 : DFSDM 2 Channel 5 (available only for STM32F413_423xx devices)
* @arg DFSDM2_Channel6 : DFSDM 2 Channel 6 (available only for STM32F413_423xx devices)
* @arg DFSDM2_Channel7 : DFSDM 2 Channel 7 (available only for STM32F413_423xx devices)
* @param DFSDM_SCDBreak_i: where i can be a value from 0 to 3 to select the specified Break signal.
* @param NewState: new state of the selected DFSDM_SCDBreak_i.
* This parameter can be: ENABLE or DISABLE.
* @retval None
*/
void DFSDM_ConfigBRKAnalogWatchDog(DFSDM_Channel_TypeDef* DFSDM_Channelx, uint32_t DFSDM_SCDBreak_i, FunctionalState NewState)
{
/* Check the parameters */
assert_param(IS_DFSDM_ALL_CHANNEL(DFSDM_Channelx));
assert_param(IS_DFSDM_SCD_BREAK_SIGNAL(DFSDM_SCDBreak_i));
assert_param(IS_FUNCTIONAL_STATE(NewState));
if (NewState != DISABLE)
{
/* Set the BKSCD[i] bit */
DFSDM_Channelx -> CHAWSCDR |= DFSDM_SCDBreak_i;
}
else
{
/* Reset the BKSCD[i] bit */
DFSDM_Channelx -> CHAWSCDR &= ~(DFSDM_SCDBreak_i);
}
}
/**
* @brief Enables or disables the specified Break_i siganl to the specified DFSDM_Channelx.
* @param DFSDM_Channelx: specifies the channel to be selected.
* This parameter can be one of the following values :
* @arg DFSDM1_Channel0 : DFSDM 1 Channel 0
* @arg DFSDM1_Channel1 : DFSDM 1 Channel 1
* @arg DFSDM1_Channel2 : DFSDM 1 Channel 2
* @arg DFSDM1_Channel3 : DFSDM 1 Channel 3
* @arg DFSDM2_Channel0 : DFSDM 2 Channel 0 (available only for STM32F413_423xx devices)
* @arg DFSDM2_Channel1 : DFSDM 2 Channel 1 (available only for STM32F413_423xx devices)
* @arg DFSDM2_Channel2 : DFSDM 2 Channel 2 (available only for STM32F413_423xx devices)
* @arg DFSDM2_Channel3 : DFSDM 2 Channel 3 (available only for STM32F413_423xx devices)
* @arg DFSDM2_Channel4 : DFSDM 2 Channel 4 (available only for STM32F413_423xx devices)
* @arg DFSDM2_Channel5 : DFSDM 2 Channel 5 (available only for STM32F413_423xx devices)
* @arg DFSDM2_Channel6 : DFSDM 2 Channel 6 (available only for STM32F413_423xx devices)
* @arg DFSDM2_Channel7 : DFSDM 2 Channel 7 (available only for STM32F413_423xx devices)
* @param DFSDM_SCDBreak_i: where i can be a value from 0 to 3 to select the specified Break signal.
* @param NewState: new state of the selected DFSDM_SCDBreak_i.
* This parameter can be: ENABLE or DISABLE.
* @retval None
*/
void DFSDM_ConfigBRKShortCircuitDetector(DFSDM_Channel_TypeDef* DFSDM_Channelx, uint32_t DFSDM_SCDBreak_i, FunctionalState NewState)
{
/* Check the parameters */
assert_param(IS_DFSDM_ALL_CHANNEL(DFSDM_Channelx));
assert_param(IS_DFSDM_SCD_BREAK_SIGNAL(DFSDM_SCDBreak_i));
assert_param(IS_FUNCTIONAL_STATE(NewState));
if (NewState != DISABLE)
{
/* Set the BKSCD[i] bit */
DFSDM_Channelx -> CHAWSCDR |= DFSDM_SCDBreak_i;
}
else
{
/* Reset the BKSCD[i] bit */
DFSDM_Channelx -> CHAWSCDR &= ~(DFSDM_SCDBreak_i);
}
}
/**
* @brief Defines the threshold counter for the short circuit detector for the selected DFSDM_Channelx.
* @param DFSDM_Channelx: specifies the channel to be selected.
* This parameter can be one of the following values :
* @arg DFSDM1_Channel0 : DFSDM 1 Channel 0
* @arg DFSDM1_Channel1 : DFSDM 1 Channel 1
* @arg DFSDM1_Channel2 : DFSDM 1 Channel 2
* @arg DFSDM1_Channel3 : DFSDM 1 Channel 3
* @arg DFSDM2_Channel0 : DFSDM 2 Channel 0 (available only for STM32F413_423xx devices)
* @arg DFSDM2_Channel1 : DFSDM 2 Channel 1 (available only for STM32F413_423xx devices)
* @arg DFSDM2_Channel2 : DFSDM 2 Channel 2 (available only for STM32F413_423xx devices)
* @arg DFSDM2_Channel3 : DFSDM 2 Channel 3 (available only for STM32F413_423xx devices)
* @arg DFSDM2_Channel4 : DFSDM 2 Channel 4 (available only for STM32F413_423xx devices)
* @arg DFSDM2_Channel5 : DFSDM 2 Channel 5 (available only for STM32F413_423xx devices)
* @arg DFSDM2_Channel6 : DFSDM 2 Channel 6 (available only for STM32F413_423xx devices)
* @arg DFSDM2_Channel7 : DFSDM 2 Channel 7 (available only for STM32F413_423xx devices)
* @param DFSDM_SCDThreshold: The threshold counter, this parameter can be a value between 0 and 255.
* @retval None
*/
void DFSDM_ConfigShortCircuitThreshold(DFSDM_Channel_TypeDef* DFSDM_Channelx, uint32_t DFSDM_SCDThreshold)
{
uint32_t tmpreg1 = 0;
/* Check the parameters */
assert_param(IS_DFSDM_ALL_CHANNEL(DFSDM_Channelx));
assert_param(IS_DFSDM_CSD_THRESHOLD_VALUE(DFSDM_SCDThreshold));
/* Get the DFSDM_Channelx AWSCDR value */
tmpreg1 = DFSDM_Channelx -> CHAWSCDR;
/* Clear the SCDT bits */
tmpreg1 &= ~(DFSDM_CHAWSCDR_SCDT);
/* Set or Reset the SCDT bits */
tmpreg1 |= DFSDM_SCDThreshold;
/* Write to DFSDM Channelx AWSCDR */
DFSDM_Channelx -> CHAWSCDR = tmpreg1;
}
/**
* @brief Selects the channel to be guarded by the Analog watchdog for the selected DFSDMx,
* and select if the fast analog watchdog is enabled or not.
* @param DFSDMx: specifies the filter to be selected :
* This parameter can be one of the following values :
* @arg DFSDM1_0 : DFSDM 1 Filter 0
* @arg DFSDM1_1 : DFSDM 1 Filter 1
* @arg DFSDM2_0 : DFSDM 2 Filter 0 (available only for STM32F413_423xx devices)
* @arg DFSDM2_1 : DFSDM 2 Filter 1 (available only for STM32F413_423xx devices)
* @arg DFSDM2_2 : DFSDM 2 Filter 2 (available only for STM32F413_423xx devices)
* @arg DFSDM2_3 : DFSDM 2 Filter 3 (available only for STM32F413_423xx devices)
* @param DFSDM_AWDChannelx: where x can be a value from 0 to 7 to select the DFSDM Channel.
* @param DFSDM_AWDFastMode: The analog watchdog fast mode.
* This parameter can be a value of @ref DFSDM_AWD_Fast_Mode_Selection.
* @retval None
*/
void DFSDM_ConfigAnalogWatchdog(DFSDM_Filter_TypeDef* DFSDMx, uint32_t DFSDM_AWDChannelx, uint32_t DFSDM_AWDFastMode)
{
uint32_t tmpreg1 = 0;
uint32_t tmpreg2 = 0;
/* Check the parameters */
assert_param(IS_DFSDM_ALL_FILTER(DFSDMx));
assert_param(IS_DFSDM_AWD_CHANNEL(DFSDM_AWDChannelx));
assert_param(IS_DFSDM_AWD_MODE(DFSDM_AWDFastMode));
/* Get the DFSDMx CR2 value */
tmpreg1 = DFSDMx -> FLTCR2;
/* Clear the AWDCH bits */
tmpreg1 &= ~(DFSDM_FLTCR2_AWDCH);
/* Set or Reset the AWDCH bits */
tmpreg1 |= DFSDM_AWDChannelx;
/* Write to DFSDMx CR2 Register */
DFSDMx -> FLTCR2 |= tmpreg1;
/* Get the DFSDMx CR1 value */
tmpreg2 = DFSDMx->FLTCR1;
/* Clear the AWFSEL bit */
tmpreg2 &= ~(DFSDM_FLTCR1_AWFSEL);
/* Set or Reset the AWFSEL bit */
tmpreg2 |= DFSDM_AWDFastMode;
/* Write to DFSDMx CR1 Register */
DFSDMx->FLTCR1 = tmpreg2;
}
/**
* @brief Selects the channel to be guarded by the Analog watchdog of the selected DFSDMx, and the mode to be used.
* @param DFSDMx: specifies the filter to be selected :
* This parameter can be one of the following values :
* @arg DFSDM1_0 : DFSDM 1 Filter 0
* @arg DFSDM1_1 : DFSDM 1 Filter 1
* @arg DFSDM2_0 : DFSDM 2 Filter 0 (available only for STM32F413_423xx devices)
* @arg DFSDM2_1 : DFSDM 2 Filter 1 (available only for STM32F413_423xx devices)
* @arg DFSDM2_2 : DFSDM 2 Filter 2 (available only for STM32F413_423xx devices)
* @arg DFSDM2_3 : DFSDM 2 Filter 3 (available only for STM32F413_423xx devices)
* @param DFSDM_ExtremChannelx: where x can be a value from 0 to 7 to select the Channel to be connected
* to the Extremes detector.
* @retval None
*/
void DFSDM_SelectExtremesDetectorChannel(DFSDM_Filter_TypeDef* DFSDMx, uint32_t DFSDM_ExtremChannelx)
{
uint32_t tmpreg1 = 0;
/* Check the parameters */
assert_param(IS_DFSDM_ALL_FILTER(DFSDMx));
assert_param(IS_DFSDM_EXTREM_CHANNEL(DFSDM_ExtremChannelx));
/* Get the DFSDMx CR2 value */
tmpreg1 = DFSDMx -> FLTCR2;
/* Clear the EXCH bits */
tmpreg1 &= ~(DFSDM_FLTCR2_EXCH);
/* Set or Reset the AWDCH bits */
tmpreg1 |= DFSDM_ExtremChannelx;
/* Write to DFSDMx CR2 Register */
DFSDMx -> FLTCR2 = tmpreg1;
}
/**
* @brief Returns the regular conversion data by the DFSDMx.
* @param DFSDMx: specifies the filter to be selected :
* This parameter can be one of the following values :
* @arg DFSDM1_0 : DFSDM 1 Filter 0
* @arg DFSDM1_1 : DFSDM 1 Filter 1
* @arg DFSDM2_0 : DFSDM 2 Filter 0 (available only for STM32F413_423xx devices)
* @arg DFSDM2_1 : DFSDM 2 Filter 1 (available only for STM32F413_423xx devices)
* @arg DFSDM2_2 : DFSDM 2 Filter 2 (available only for STM32F413_423xx devices)
* @arg DFSDM2_3 : DFSDM 2 Filter 3 (available only for STM32F413_423xx devices)
* @retval The converted regular data.
* @note This function returns a signed value.
*/
int32_t DFSDM_GetRegularConversionData(DFSDM_Filter_TypeDef* DFSDMx)
{
uint32_t reg = 0;
int32_t value = 0;
/* Check the parameters */
assert_param(IS_DFSDM_ALL_FILTER(DFSDMx));
/* Get value of data register for regular channel */
reg = DFSDMx -> FLTRDATAR;
/* Extract conversion value */
value = (((reg & 0xFFFFFF00) >> 8));
/* Return the conversion result */
return value;
}
/**
* @brief Returns the injected conversion data by the DFSDMx.
* @param DFSDMx: specifies the filter to be selected :
* This parameter can be one of the following values :
* @arg DFSDM1_0 : DFSDM 1 Filter 0
* @arg DFSDM1_1 : DFSDM 1 Filter 1
* @arg DFSDM2_0 : DFSDM 2 Filter 0 (available only for STM32F413_423xx devices)
* @arg DFSDM2_1 : DFSDM 2 Filter 1 (available only for STM32F413_423xx devices)
* @arg DFSDM2_2 : DFSDM 2 Filter 2 (available only for STM32F413_423xx devices)
* @arg DFSDM2_3 : DFSDM 2 Filter 3 (available only for STM32F413_423xx devices)
* @retval The converted regular data.
* @note This function returns a signed value.
*/
int32_t DFSDM_GetInjectedConversionData(DFSDM_Filter_TypeDef* DFSDMx)
{
uint32_t reg = 0;
int32_t value = 0;
/* Check the parameters */
assert_param(IS_DFSDM_ALL_FILTER(DFSDMx));
/* Get value of data register for regular channel */
reg = DFSDMx -> FLTJDATAR;
/* Extract conversion value */
value = ((reg & 0xFFFFFF00) >> 8);
/* Return the conversion result */
return value;
}
/**
* @brief Returns the highest value converted by the DFSDMx.
* @param DFSDMx: specifies the filter to be selected :
* This parameter can be one of the following values :
* @arg DFSDM1_0 : DFSDM 1 Filter 0
* @arg DFSDM1_1 : DFSDM 1 Filter 1
* @arg DFSDM2_0 : DFSDM 2 Filter 0 (available only for STM32F413_423xx devices)
* @arg DFSDM2_1 : DFSDM 2 Filter 1 (available only for STM32F413_423xx devices)
* @arg DFSDM2_2 : DFSDM 2 Filter 2 (available only for STM32F413_423xx devices)
* @arg DFSDM2_3 : DFSDM 2 Filter 3 (available only for STM32F413_423xx devices)
* @retval The highest converted value.
* @note This function returns a signed value.
*/
int32_t DFSDM_GetMaxValue(DFSDM_Filter_TypeDef* DFSDMx)
{
int32_t value = 0;
/* Check the parameters */
assert_param(IS_DFSDM_ALL_FILTER(DFSDMx));
value = ((DFSDMx -> FLTEXMAX) >> 8);
/* Return the highest converted value */
return value;
}
/**
* @brief Returns the lowest value converted by the DFSDMx.
* @param DFSDMx: specifies the filter to be selected :
* This parameter can be one of the following values :
* @arg DFSDM1_0 : DFSDM 1 Filter 0
* @arg DFSDM1_1 : DFSDM 1 Filter 1
* @arg DFSDM2_0 : DFSDM 2 Filter 0 (available only for STM32F413_423xx devices)
* @arg DFSDM2_1 : DFSDM 2 Filter 1 (available only for STM32F413_423xx devices)
* @arg DFSDM2_2 : DFSDM 2 Filter 2 (available only for STM32F413_423xx devices)
* @arg DFSDM2_3 : DFSDM 2 Filter 3 (available only for STM32F413_423xx devices)
* @retval The lowest converted value.
* @note This function returns a signed value.
*/
int32_t DFSDM_GetMinValue(DFSDM_Filter_TypeDef* DFSDMx)
{
int32_t value = 0;
/* Check the parameters */
assert_param(IS_DFSDM_ALL_FILTER(DFSDMx));
value = ((DFSDMx -> FLTEXMIN) >> 8);
/* Return the lowest conversion value */
return value;
}
/**
* @brief Returns the number of channel on which is captured the highest converted data by the DFSDMx.
* @param DFSDMx: specifies the filter to be selected :
* This parameter can be one of the following values :
* @arg DFSDM1_0 : DFSDM 1 Filter 0
* @arg DFSDM1_1 : DFSDM 1 Filter 1
* @arg DFSDM2_0 : DFSDM 2 Filter 0 (available only for STM32F413_423xx devices)
* @arg DFSDM2_1 : DFSDM 2 Filter 1 (available only for STM32F413_423xx devices)
* @arg DFSDM2_2 : DFSDM 2 Filter 2 (available only for STM32F413_423xx devices)
* @arg DFSDM2_3 : DFSDM 2 Filter 3 (available only for STM32F413_423xx devices)
* @retval The highest converted value.
*/
int32_t DFSDM_GetMaxValueChannel(DFSDM_Filter_TypeDef* DFSDMx)
{
/* Check the parameters */
assert_param(IS_DFSDM_ALL_FILTER(DFSDMx));
/* Return the highest converted value */
return ((DFSDMx -> FLTEXMAX) & (~DFSDM_FLTEXMAX_EXMAXCH));
}
/**
* @brief Returns the number of channel on which is captured the lowest converted data by the DFSDMx.
* @param DFSDMx: specifies the filter to be selected :
* This parameter can be one of the following values :
* @arg DFSDM1_0 : DFSDM 1 Filter 0
* @arg DFSDM1_1 : DFSDM 1 Filter 1
* @arg DFSDM2_0 : DFSDM 2 Filter 0 (available only for STM32F413_423xx devices)
* @arg DFSDM2_1 : DFSDM 2 Filter 1 (available only for STM32F413_423xx devices)
* @arg DFSDM2_2 : DFSDM 2 Filter 2 (available only for STM32F413_423xx devices)
* @arg DFSDM2_3 : DFSDM 2 Filter 3 (available only for STM32F413_423xx devices)
* @retval The lowest converted value.
*/
int32_t DFSDM_GetMinValueChannel(DFSDM_Filter_TypeDef* DFSDMx)
{
/* Check the parameters */
assert_param(IS_DFSDM_ALL_FILTER(DFSDMx));
/* Return the lowest converted value */
return ((DFSDMx -> FLTEXMIN) & (~DFSDM_FLTEXMIN_EXMINCH));
}
/**
* @brief Returns the conversion time (in 28-bit timer unit) for DFSDMx.
* @param DFSDMx: specifies the filter to be selected :
* This parameter can be one of the following values :
* @arg DFSDM1_0 : DFSDM 1 Filter 0
* @arg DFSDM1_1 : DFSDM 1 Filter 1
* @arg DFSDM2_0 : DFSDM 2 Filter 0 (available only for STM32F413_423xx devices)
* @arg DFSDM2_1 : DFSDM 2 Filter 1 (available only for STM32F413_423xx devices)
* @arg DFSDM2_2 : DFSDM 2 Filter 2 (available only for STM32F413_423xx devices)
* @arg DFSDM2_3 : DFSDM 2 Filter 3 (available only for STM32F413_423xx devices)
* @retval Conversion time.
*/
uint32_t DFSDM_GetConversionTime(DFSDM_Filter_TypeDef* DFSDMx)
{
/* Check the parameters */
assert_param(IS_DFSDM_ALL_FILTER(DFSDMx));
/* Return the lowest converted value */
return ((DFSDMx -> FLTCNVTIMR >> 4) & 0x0FFFFFFF);
}
/**
* @brief Configures Sinc Filter for the Analog watchdog by setting
* the Sinc filter order and the Oversampling ratio for the specified DFSDM_Channelx.
* @param DFSDM_Channelx: specifies the channel to be selected.
* This parameter can be one of the following values :
* @arg DFSDM1_Channel0 : DFSDM 1 Channel 0
* @arg DFSDM1_Channel1 : DFSDM 1 Channel 1
* @arg DFSDM1_Channel2 : DFSDM 1 Channel 2
* @arg DFSDM1_Channel3 : DFSDM 1 Channel 3
* @arg DFSDM2_Channel0 : DFSDM 2 Channel 0 (available only for STM32F413_423xx devices)
* @arg DFSDM2_Channel1 : DFSDM 2 Channel 1 (available only for STM32F413_423xx devices)
* @arg DFSDM2_Channel2 : DFSDM 2 Channel 2 (available only for STM32F413_423xx devices)
* @arg DFSDM2_Channel3 : DFSDM 2 Channel 3 (available only for STM32F413_423xx devices)
* @arg DFSDM2_Channel4 : DFSDM 2 Channel 4 (available only for STM32F413_423xx devices)
* @arg DFSDM2_Channel5 : DFSDM 2 Channel 5 (available only for STM32F413_423xx devices)
* @arg DFSDM2_Channel6 : DFSDM 2 Channel 6 (available only for STM32F413_423xx devices)
* @arg DFSDM2_Channel7 : DFSDM 2 Channel 7 (available only for STM32F413_423xx devices)
* @param DFSDM_AWDSincOrder: The Sinc Filter order this parameter can be a value of @ref DFSDM_AWD_Sinc_Order.
* @param DFSDM_AWDSincOverSampleRatio: The Filter Oversampling ratio, this parameter can be a value between 1 and 32.
* @retval None
*/
void DFSDM_ConfigAWDFilter(DFSDM_Channel_TypeDef* DFSDM_Channelx, uint32_t DFSDM_AWDSincOrder, uint32_t DFSDM_AWDSincOverSampleRatio)
{
uint32_t tmpreg1 = 0;
/* Check the parameters */
assert_param(IS_DFSDM_ALL_CHANNEL(DFSDM_Channelx));
assert_param(IS_DFSDM_AWD_SINC_ORDER(DFSDM_AWDSincOrder));
assert_param(IS_DFSDM_AWD_OVRSMPL_RATIO(DFSDM_AWDSincOverSampleRatio));
/* Get the DFSDM_Channelx CHAWSCDR value */
tmpreg1 = DFSDM_Channelx -> CHAWSCDR;
/* Clear the FORD and FOSR bits */
tmpreg1 &= ~(DFSDM_CHAWSCDR_AWFORD | DFSDM_CHAWSCDR_AWFOSR);
/* Set or Reset the SCDT bits */
tmpreg1 |= (DFSDM_AWDSincOrder | ((DFSDM_AWDSincOverSampleRatio -1) << 16)) ;
/* Write to DFSDM Channelx CHAWSCDR */
DFSDM_Channelx -> CHAWSCDR = tmpreg1;
}
/**
* @brief Returns the last Analog Watchdog Filter conversion result data for channelx.
* @param DFSDM_Channelx: specifies the channel to be selected.
* This parameter can be one of the following values :
* @arg DFSDM1_Channel0 : DFSDM 1 Channel 0
* @arg DFSDM1_Channel1 : DFSDM 1 Channel 1
* @arg DFSDM1_Channel2 : DFSDM 1 Channel 2
* @arg DFSDM1_Channel3 : DFSDM 1 Channel 3
* @arg DFSDM2_Channel0 : DFSDM 2 Channel 0 (available only for STM32F413_423xx devices)
* @arg DFSDM2_Channel1 : DFSDM 2 Channel 1 (available only for STM32F413_423xx devices)
* @arg DFSDM2_Channel2 : DFSDM 2 Channel 2 (available only for STM32F413_423xx devices)
* @arg DFSDM2_Channel3 : DFSDM 2 Channel 3 (available only for STM32F413_423xx devices)
* @arg DFSDM2_Channel4 : DFSDM 2 Channel 4 (available only for STM32F413_423xx devices)
* @arg DFSDM2_Channel5 : DFSDM 2 Channel 5 (available only for STM32F413_423xx devices)
* @arg DFSDM2_Channel6 : DFSDM 2 Channel 6 (available only for STM32F413_423xx devices)
* @arg DFSDM2_Channel7 : DFSDM 2 Channel 7 (available only for STM32F413_423xx devices)
* @retval The Data conversion value.
*/
uint32_t DFSDM_GetAWDConversionValue(DFSDM_Channel_TypeDef* DFSDM_Channelx)
{
/* Check the parameters */
assert_param(IS_DFSDM_ALL_CHANNEL(DFSDM_Channelx));
/* Return the last analog watchdog filter conversion value */
return DFSDM_Channelx -> CHWDATAR;
}
/**
* @brief Configures the High Threshold and the Low threshold for the Analog watchdog of the selected DFSDMx.
* @param DFSDMx: specifies the filter to be selected :
* This parameter can be one of the following values :
* @arg DFSDM1_0 : DFSDM 1 Filter 0
* @arg DFSDM1_1 : DFSDM 1 Filter 1
* @arg DFSDM2_0 : DFSDM 2 Filter 0 (available only for STM32F413_423xx devices)
* @arg DFSDM2_1 : DFSDM 2 Filter 1 (available only for STM32F413_423xx devices)
* @arg DFSDM2_2 : DFSDM 2 Filter 2 (available only for STM32F413_423xx devices)
* @arg DFSDM2_3 : DFSDM 2 Filter 3 (available only for STM32F413_423xx devices)
* @param DFSDM_HighThreshold: High threshold value. This parameter can be value between 0 and 0xFFFFFF.
* @param DFSDM_LowThreshold: Low threshold value. This parameter can be value between 0 and 0xFFFFFF.
* @retval None.
* @note In case of channels transceivers monitoring (Analog Watchdog fast mode Enabled)),
* only the higher 16 bits define the 16-bit threshold compared with analog watchdog filter output.
*/
void DFSDM_SetAWDThreshold(DFSDM_Filter_TypeDef* DFSDMx, uint32_t DFSDM_HighThreshold, uint32_t DFSDM_LowThreshold)
{
uint32_t tmpreg1 = 0;
uint32_t tmpreg2 = 0;
/* Check the parameters */
assert_param(IS_DFSDM_HIGH_THRESHOLD(DFSDM_HighThreshold));
assert_param(IS_DFSDM_LOW_THRESHOLD(DFSDM_LowThreshold));
/* Get the DFSDMx AWHTR value */
tmpreg1 = DFSDMx -> FLTAWHTR;
/* Clear the AWHT bits */
tmpreg1 &= ~(DFSDM_FLTAWHTR_AWHT);
/* Set or Reset the AWHT bits */
tmpreg1 |= (DFSDM_HighThreshold << 8 );
/* Write to DFSDMx AWHTR Register */
DFSDMx -> FLTAWHTR = tmpreg1;
/* Get the DFSDMx AWLTR value */
tmpreg2 = DFSDMx -> FLTAWLTR;
/* Clear the AWLTR bits */
tmpreg2 &= ~(DFSDM_FLTAWLTR_AWLT);
/* Set or Reset the AWLTR bits */
tmpreg2 |= (DFSDM_LowThreshold << 8 );
/* Write to DFSDMx AWLTR Register */
DFSDMx -> FLTAWLTR = tmpreg2;
}
/**
* @brief Selects the injected channel for the selected DFSDMx.
* @param DFSDMx: specifies the filter to be selected :
* This parameter can be one of the following values :
* @arg DFSDM1_0 : DFSDM 1 Filter 0
* @arg DFSDM1_1 : DFSDM 1 Filter 1
* @arg DFSDM2_0 : DFSDM 2 Filter 0 (available only for STM32F413_423xx devices)
* @arg DFSDM2_1 : DFSDM 2 Filter 1 (available only for STM32F413_423xx devices)
* @arg DFSDM2_2 : DFSDM 2 Filter 2 (available only for STM32F413_423xx devices)
* @arg DFSDM2_3 : DFSDM 2 Filter 3 (available only for STM32F413_423xx devices)
* @param DFSDM_InjectedChannelx: where x can be a value from 0 to 7 to select the Channel to be configuraed as
* injected channel.
* @retval None
* @note User can select up to 8 channels.
*/
void DFSDM_SelectInjectedChannel(DFSDM_Filter_TypeDef* DFSDMx, uint32_t DFSDM_InjectedChannelx)
{
uint32_t tmpreg1 = 0;
/* Check the parameters */
assert_param(IS_DFSDM_ALL_FILTER(DFSDMx));
assert_param(IS_DFSDM_INJECT_CHANNEL(DFSDM_InjectedChannelx));
/* Get the DFSDMx JCHGR value */
tmpreg1 = DFSDMx -> FLTJCHGR;
/* Clear the JCHGR bits */
tmpreg1 &= ~(DFSDM_FLTJCHGR_JCHG);
/* Set or Reset the JCHGR bits */
tmpreg1 |= DFSDM_InjectedChannelx;
/* Write to DFSDMx JCHGR Register */
DFSDMx -> FLTJCHGR |= tmpreg1;
}
/**
* @brief Selects the regular channel for the selected DFSDMx.
* @param DFSDMx: specifies the filter to be selected :
* This parameter can be one of the following values :
* @arg DFSDM1_0 : DFSDM 1 Filter 0
* @arg DFSDM1_1 : DFSDM 1 Filter 1
* @arg DFSDM2_0 : DFSDM 2 Filter 0 (available only for STM32F413_423xx devices)
* @arg DFSDM2_1 : DFSDM 2 Filter 1 (available only for STM32F413_423xx devices)
* @arg DFSDM2_2 : DFSDM 2 Filter 2 (available only for STM32F413_423xx devices)
* @arg DFSDM2_3 : DFSDM 2 Filter 3 (available only for STM32F413_423xx devices)
* @param DFSDM_RegularChannelx: where x can be a value from 0 to 7 to select the Channel to be configurated as
* regular channel.
* @retval None
* @note User can select only one channel.
*/
void DFSDM_SelectRegularChannel(DFSDM_Filter_TypeDef* DFSDMx, uint32_t DFSDM_RegularChannelx)
{
uint32_t tmpreg1 = 0;
/* Check the parameters */
assert_param(IS_DFSDM_ALL_FILTER(DFSDMx));
assert_param(IS_DFSDM_REGULAR_CHANNEL(DFSDM_RegularChannelx));
/* Get the DFSDMx CR1 value */
tmpreg1 = DFSDMx -> FLTCR1;
/* Clear the RCH bits */
tmpreg1 &= ~(DFSDM_FLTCR1_RCH);
/* Set or Reset the RCH bits */
tmpreg1 |= DFSDM_RegularChannelx;
/* Write to DFSDMx CR1 Register */
DFSDMx -> FLTCR1 = tmpreg1;
}
/**
* @brief Starts a software start for the injected group of channels of the selected DFSDMx.
* @param DFSDMx: specifies the filter to be selected :
* This parameter can be one of the following values :
* @arg DFSDM1_0 : DFSDM 1 Filter 0
* @arg DFSDM1_1 : DFSDM 1 Filter 1
* @arg DFSDM2_0 : DFSDM 2 Filter 0 (available only for STM32F413_423xx devices)
* @arg DFSDM2_1 : DFSDM 2 Filter 1 (available only for STM32F413_423xx devices)
* @arg DFSDM2_2 : DFSDM 2 Filter 2 (available only for STM32F413_423xx devices)
* @arg DFSDM2_3 : DFSDM 2 Filter 3 (available only for STM32F413_423xx devices)
* @retval None
*/
void DFSDM_StartSoftwareInjectedConversion(DFSDM_Filter_TypeDef* DFSDMx)
{
/* Check the parameters */
assert_param(IS_DFSDM_ALL_FILTER(DFSDMx));
/* Write 1 to DFSDMx CR1 RSWSTAR bit */
DFSDMx -> FLTCR1 |= DFSDM_FLTCR1_JSWSTART;
}
/**
* @brief Starts a software start of the regular channel of the selected DFSDMx.
* @param DFSDMx: specifies the filter to be selected :
* This parameter can be one of the following values :
* @arg DFSDM1_0 : DFSDM 1 Filter 0
* @arg DFSDM1_1 : DFSDM 1 Filter 1
* @arg DFSDM2_0 : DFSDM 2 Filter 0 (available only for STM32F413_423xx devices)
* @arg DFSDM2_1 : DFSDM 2 Filter 1 (available only for STM32F413_423xx devices)
* @arg DFSDM2_2 : DFSDM 2 Filter 2 (available only for STM32F413_423xx devices)
* @arg DFSDM2_3 : DFSDM 2 Filter 3 (available only for STM32F413_423xx devices)
* @retval None
*/
void DFSDM_StartSoftwareRegularConversion(DFSDM_Filter_TypeDef* DFSDMx)
{
/* Check the parameters */
assert_param(IS_DFSDM_ALL_FILTER(DFSDMx));
/* Write 1 to DFSDMx CR1 RSWSTAR bit */
DFSDMx -> FLTCR1 |= DFSDM_FLTCR1_RSWSTART;
}
/**
* @brief Selects the Trigger signal to launch the injected conversions of the selected DFSDMx.
* @param DFSDMx: specifies the filter to be selected :
* This parameter can be one of the following values :
* @arg DFSDM1_0 : DFSDM 1 Filter 0
* @arg DFSDM1_1 : DFSDM 1 Filter 1
* @arg DFSDM2_0 : DFSDM 2 Filter 0 (available only for STM32F413_423xx devices)
* @arg DFSDM2_1 : DFSDM 2 Filter 1 (available only for STM32F413_423xx devices)
* @arg DFSDM2_2 : DFSDM 2 Filter 2 (available only for STM32F413_423xx devices)
* @arg DFSDM2_3 : DFSDM 2 Filter 3 (available only for STM32F413_423xx devices)
* @param DFSDM_InjectedTrigger: the trigger signal.
* This parameter can be a value of: @ref DFSDM_Injected_Trigger_signal
* @param DFSDM_TriggerEdge: the edge of the selected trigger
* This parameter can be a value of: @ref DFSDM_Trigger_Edge_selection
* @retval None.
* @note This function can be used only when the filter is disabled, use DFSDM_FilterCmd()
* to disable the filter.
*/
void DFSDM_ConfigInjectedTrigger(DFSDM_Filter_TypeDef* DFSDMx, uint32_t DFSDM_Trigger, uint32_t DFSDM_TriggerEdge)
{
uint32_t tmpreg1 = 0;
/* Check the parameters */
assert_param(IS_DFSDM_ALL_FILTER(DFSDMx));
if (DFSDMx == DFSDM0)
{
assert_param(IS_DFSDM0_INJ_TRIGGER(DFSDM_Trigger));
}
else
{
assert_param(IS_DFSDM1_INJ_TRIGGER(DFSDM_Trigger));
}
assert_param(IS_DFSDM_TRIGGER_EDGE(DFSDM_TriggerEdge));
/* Get the DFSDMx CR1 value */
tmpreg1 = DFSDMx -> FLTCR1;
/* Clear the JEXTSEL & JEXTEN bits */
tmpreg1 &= ~(DFSDM_FLTCR1_JEXTSEL | DFSDM_FLTCR1_JEXTEN);
/* Set or Reset the JEXTSEL & JEXTEN bits */
tmpreg1 |= (DFSDM_Trigger | DFSDM_TriggerEdge);
/* Write to DFSDMx CR1 Register */
DFSDMx -> FLTCR1 = tmpreg1;
}
/**
* @brief Starts an injected conversion synchronously when in DFSDM0
* an injected conversion started by software.
* @param DFSDMx: specifies the filter to be selected :
* This parameter can be one of the following values :
* @arg DFSDM1_0 : DFSDM 1 Filter 0
* @arg DFSDM1_1 : DFSDM 1 Filter 1
* @arg DFSDM2_0 : DFSDM 2 Filter 0 (available only for STM32F413_423xx devices)
* @arg DFSDM2_1 : DFSDM 2 Filter 1 (available only for STM32F413_423xx devices)
* @arg DFSDM2_2 : DFSDM 2 Filter 2 (available only for STM32F413_423xx devices)
* @arg DFSDM2_3 : DFSDM 2 Filter 3 (available only for STM32F413_423xx devices)
* @retval None
* @note This function can be used only when the filter is disabled, use DFSDM_FilterCmd()
* to disable the filter.
*/
void DFSDM_SynchronousFilter0InjectedStart(DFSDM_Filter_TypeDef* DFSDMx)
{
/* Check the parameters */
assert_param(IS_DFSDM_SYNC_FILTER(DFSDMx));
/* Write 1 to DFSDMx CR1 JSYNC bit */
DFSDMx -> FLTCR1 |= DFSDM_FLTCR1_JSYNC;
}
/**
* @brief Starts a regular conversion synchronously when in DFSDM0
* a regular conversion started by software.
* @param DFSDMx: specifies the filter to be selected :
* This parameter can be one of the following values :
* @arg DFSDM1_0 : DFSDM 1 Filter 0
* @arg DFSDM1_1 : DFSDM 1 Filter 1
* @arg DFSDM2_0 : DFSDM 2 Filter 0 (available only for STM32F413_423xx devices)
* @arg DFSDM2_1 : DFSDM 2 Filter 1 (available only for STM32F413_423xx devices)
* @arg DFSDM2_2 : DFSDM 2 Filter 2 (available only for STM32F413_423xx devices)
* @arg DFSDM2_3 : DFSDM 2 Filter 3 (available only for STM32F413_423xx devices)
* @retval None
* @note This function can be used only when the filter is disabled, use DFSDM_FilterCmd()
* to disable the filter.
*/
void DFSDM_SynchronousFilter0RegularStart(DFSDM_Filter_TypeDef* DFSDMx)
{
/* Check the parameters */
assert_param(IS_DFSDM_SYNC_FILTER(DFSDMx));
/* Write 1 to DFSDMx CR1 RSYNC bit */
DFSDMx -> FLTCR1 |= DFSDM_FLTCR1_RSYNC;
}
/**
* @brief Enables or Disables the continue mode for Regular conversion for the selected filter DFSDMx.
* @param DFSDMx: specifies the filter to be selected :
* This parameter can be one of the following values :
* @arg DFSDM1_0 : DFSDM 1 Filter 0
* @arg DFSDM1_1 : DFSDM 1 Filter 1
* @arg DFSDM2_0 : DFSDM 2 Filter 0 (available only for STM32F413_423xx devices)
* @arg DFSDM2_1 : DFSDM 2 Filter 1 (available only for STM32F413_423xx devices)
* @arg DFSDM2_2 : DFSDM 2 Filter 2 (available only for STM32F413_423xx devices)
* @arg DFSDM2_3 : DFSDM 2 Filter 3 (available only for STM32F413_423xx devices)
* @param NewState: new state of the Continuous mode.
* This parameter can be: ENABLE or DISABLE.
* @retval None
*/
void DFSDM_RegularContinuousModeCmd(DFSDM_Filter_TypeDef* DFSDMx, FunctionalState NewState)
{
/* Check the parameters */
assert_param(IS_DFSDM_ALL_FILTER(DFSDMx));
assert_param(IS_FUNCTIONAL_STATE(NewState));
if (NewState != DISABLE)
{
/* Enable the RCONT bit */
DFSDMx -> FLTCR1 |= DFSDM_FLTCR1_RCONT;
}
else
{
/* Disable the RCONT bit */
DFSDMx -> FLTCR1 &= ~(DFSDM_FLTCR1_RCONT);
}
}
/**
* @brief Enables or Disables the Fast mode for the selected filter DFSDMx.
* @param DFSDMx: specifies the filter to be selected :
* This parameter can be one of the following values :
* @arg DFSDM1_0 : DFSDM 1 Filter 0
* @arg DFSDM1_1 : DFSDM 1 Filter 1
* @arg DFSDM2_0 : DFSDM 2 Filter 0 (available only for STM32F413_423xx devices)
* @arg DFSDM2_1 : DFSDM 2 Filter 1 (available only for STM32F413_423xx devices)
* @arg DFSDM2_2 : DFSDM 2 Filter 2 (available only for STM32F413_423xx devices)
* @arg DFSDM2_3 : DFSDM 2 Filter 3 (available only for STM32F413_423xx devices)
* @param NewState: new state of the Fast mode.
* This parameter can be: ENABLE or DISABLE.
* @retval None
* @note If just a single channel is selected in continuous mode (either by executing a regular
* conversion or by executing a injected conversion with only one channel selected),
* the sampling rate can be increased several times by enabling the fast mode.
* @note This function can be used only when the filter is disabled, use DFSDM_FilterCmd()
* to disable the filter.
*/
void DFSDM_FastModeCmd(DFSDM_Filter_TypeDef* DFSDMx, FunctionalState NewState)
{
/* Check the parameters */
assert_param(IS_DFSDM_ALL_FILTER(DFSDMx));
assert_param(IS_FUNCTIONAL_STATE(NewState));
if (NewState != DISABLE)
{
/* Enable the FAST bit */
DFSDMx -> FLTCR1 |= DFSDM_FLTCR1_FAST;
}
else
{
/* Disable the FAST bit */
DFSDMx -> FLTCR1 &= ~(DFSDM_FLTCR1_FAST);
}
}
/**
* @brief Selects the injected conversions mode for the selected DFSDMx.
* Injected conversions can operates in Single mode or Scan mode.
* @param DFSDMx: specifies the filter to be selected :
* This parameter can be one of the following values :
* @arg DFSDM1_0 : DFSDM 1 Filter 0
* @arg DFSDM1_1 : DFSDM 1 Filter 1
* @arg DFSDM2_0 : DFSDM 2 Filter 0 (available only for STM32F413_423xx devices)
* @arg DFSDM2_1 : DFSDM 2 Filter 1 (available only for STM32F413_423xx devices)
* @arg DFSDM2_2 : DFSDM 2 Filter 2 (available only for STM32F413_423xx devices)
* @arg DFSDM2_3 : DFSDM 2 Filter 3 (available only for STM32F413_423xx devices)
* @param DFSDM_InjectConvMode: The injected conversion mode, this parameter can be:
* @arg DFSDM_InjectConvMode_Single
* @arg DFSDM_InjectConvMode_Scan
* @retval None.
* @note This function can be used only when the filter is disabled, use DFSDM_FilterCmd()
* to disable the filter.
*/
void DFSDM_SelectInjectedConversionMode(DFSDM_Filter_TypeDef* DFSDMx, uint32_t DFSDM_InjectConvMode)
{
/* Check the parameters */
assert_param(IS_DFSDM_ALL_FILTER(DFSDMx));
assert_param(IS_DFSDM_INJ_CONV_MODE(DFSDM_InjectConvMode));
/* Clear the JSCAN bit */
DFSDMx -> FLTCR1 &= ~(DFSDM_FLTCR1_JSCAN);
/* Write to DFSDMx CR1 Register */
DFSDMx -> FLTCR1 |= DFSDM_InjectConvMode;
}
/**
* @brief Enables or Disables the DMA to read data for the injected channel group of the selected filter DFSDMx.
* @param DFSDMx: specifies the filter to be selected :
* This parameter can be one of the following values :
* @arg DFSDM1_0 : DFSDM 1 Filter 0
* @arg DFSDM1_1 : DFSDM 1 Filter 1
* @arg DFSDM2_0 : DFSDM 2 Filter 0 (available only for STM32F413_423xx devices)
* @arg DFSDM2_1 : DFSDM 2 Filter 1 (available only for STM32F413_423xx devices)
* @arg DFSDM2_2 : DFSDM 2 Filter 2 (available only for STM32F413_423xx devices)
* @arg DFSDM2_3 : DFSDM 2 Filter 3 (available only for STM32F413_423xx devices)
* @param DFSDM_DMAConversionMode: Selects the mode to be configured for DMA read .
* @arg DFSDM_DMAConversionMode_Regular: DMA channel Enabled/Disabled to read data for the regular conversion
* @arg DFSDM_DMAConversionMode_Injected: DMA channel Enabled/Disabled to read data for the Injected conversion
* @param NewState: new state of the DMA channel.
* This parameter can be: ENABLE or DISABLE.
* @retval None.
* @note This function can be used only when the filter is disabled, use DFSDM_FilterCmd()
* to disable the filter.
*/
void DFSDM_DMATransferConfig(DFSDM_Filter_TypeDef* DFSDMx, uint32_t DFSDM_DMAConversionMode, FunctionalState NewState)
{
/* Check the parameters */
assert_param(IS_DFSDM_ALL_FILTER(DFSDMx));
assert_param(IS_DFSDM_CONVERSION_MODE(DFSDM_DMAConversionMode));
assert_param(IS_FUNCTIONAL_STATE(NewState));
if (NewState != DISABLE)
{
/* Enable the JDMAEN or RDMAEN bit */
DFSDMx -> FLTCR1 |= (DFSDM_FLTCR1_JDMAEN << DFSDM_DMAConversionMode) ;
}
else
{
/* Disable the JDMAEN or RDMAEN bit */
DFSDMx -> FLTCR1 &= ~(DFSDM_FLTCR1_JDMAEN << DFSDM_DMAConversionMode);
}
}
/** @defgroup DFSDM_Group3 Interrupts and flags management functions
* @brief Interrupts and flags management functions
*
@verbatim
===============================================================================
Interrupts and flags management functions
===============================================================================
This section provides functions allowing to configure the DFSDM Interrupts, get
the status and clear flags bits.
The LPT provides 7 Flags and Interrupts sources (2 flags and Interrupt sources
are available only on LPT peripherals equipped with encoder mode interface)
Flags and Interrupts sources:
=============================
1. End of injected conversion.
2. End of regular conversion.
3. Injected data overrun.
4. Regular data overrun.
5. Analog watchdog.
6. Short circuit detector.
7. Channel clock absence
- To enable a specific interrupt source, use "DFSDM_ITConfig",
"DFSDM_ITClockAbsenceCmd" and "DFSDM_ITShortCircuitDetectorCmd" functions.
- To check if an interrupt was occurred, call "DFSDM_GetITStatus","DFSDM_GetClockAbsenceITStatusfunction"
and "DFSDM_GetGetShortCircuitITStatus" functions and read returned values.
- To get a flag status, call the "DFSDM_GetFlagStatus" ,"DFSDM_GetClockAbsenceFlagStatus" ,"DFSDM_GetShortCircuitFlagStatus"
and "DFSDM_GetWatchdogFlagStatus" functions and read the returned value.
- To clear a flag or an interrupt, use DFSDM_ClearFlag,DFSDM_ClearClockAbsenceFlag,
DFSDM_ClearShortCircuitFlag,DFSDM_ClearAnalogWatchdogFlag functions with the
corresponding flag (interrupt).
@endverbatim
* @{
*/
/**
* @brief Enables or disables the specified DFSDMx interrupts.
* @param DFSDMx: specifies the filter to be selected :
* This parameter can be one of the following values :
* @arg DFSDM1_0 : DFSDM 1 Filter 0
* @arg DFSDM1_1 : DFSDM 1 Filter 1
* @arg DFSDM2_0 : DFSDM 2 Filter 0 (available only for STM32F413_423xx devices)
* @arg DFSDM2_1 : DFSDM 2 Filter 1 (available only for STM32F413_423xx devices)
* @arg DFSDM2_2 : DFSDM 2 Filter 2 (available only for STM32F413_423xx devices)
* @arg DFSDM2_3 : DFSDM 2 Filter 3 (available only for STM32F413_423xx devices)
* @param DFSDM_IT: specifies the DFSDM interrupts sources to be enabled or disabled.
* This parameter can be any combination of the following values:
* @arg DFSDM_IT_JEOC: End of injected conversion Interrupt source
* @arg DFSDM_IT_REOC: End of regular conversion Interrupt source
* @arg DFSDM_IT_JOVR: Injected data overrun Interrupt source
* @arg DFSDM_IT_ROVR: Regular data overrun Interrupt source
* @arg DFSDM_IT_AWD : Analog watchdog Interrupt source
* @param NewState: new state of the DFSDM interrupts.
* This parameter can be: ENABLE or DISABLE.
* @retval None
*/
void DFSDM_ITConfig(DFSDM_Filter_TypeDef* DFSDMx, uint32_t DFSDM_IT, FunctionalState NewState)
{
/* Check the parameters */
assert_param(IS_DFSDM_ALL_FILTER(DFSDMx));
assert_param(IS_DFSDM_IT(DFSDM_IT));
assert_param(IS_FUNCTIONAL_STATE(NewState));
if (NewState != DISABLE)
{
/* Enable the Interrupt sources */
DFSDMx->FLTCR2 |= DFSDM_IT;
}
else
{
/* Disable the Interrupt sources */
DFSDMx->FLTCR2 &= ~(DFSDM_IT);
}
}
#if defined(STM32F412xG)
/**
* @brief Enables or disables the Clock Absence Interrupt.
* @param NewState: new state of the interrupt.
* This parameter can be: ENABLE or DISABLE.
* @retval None
*/
void DFSDM_ITClockAbsenceCmd(FunctionalState NewState)
{
/* Check the parameters */
assert_param(IS_FUNCTIONAL_STATE(NewState));
if (NewState != DISABLE)
{
/* Enable the Interrupt source */
DFSDM1_0->FLTCR2 |= DFSDM_IT_CKAB;
}
else
{
/* Disable the Interrupt source */
DFSDM1_0->FLTCR2 &= ~(DFSDM_IT_CKAB);
}
}
/**
* @brief Enables or disables the Short Circuit Detector Interrupt.
* @param NewState: new state of the interrupt.
* This parameter can be: ENABLE or DISABLE.
* @retval None
*/
void DFSDM_ITShortCircuitDetectorCmd(FunctionalState NewState)
{
/* Check the parameters */
assert_param(IS_FUNCTIONAL_STATE(NewState));
if (NewState != DISABLE)
{
/* Enable the Interrupt source */
DFSDM1_0->FLTCR2 |= DFSDM_IT_SCD;
}
else
{
/* Disable the Interrupt source */
DFSDM1_0->FLTCR2 &= ~(DFSDM_IT_SCD);
}
}
#endif /* STM32F412xG */
#if defined(STM32F413_423xx)
/**
* @brief Enables or disables the Clock Absence Interrupt.
* @param Instance: select the instance of DFSDM
* This parameter can be: 1 or 2.
* @param NewState: new state of the interrupt.
* This parameter can be: ENABLE or DISABLE.
* @retval None
*/
void DFSDM_ITClockAbsenceCmd(uint32_t Instance, FunctionalState NewState)
{
/* Check the parameters */
assert_param(IS_FUNCTIONAL_STATE(NewState));
if(Instance == 1)
{
if (NewState != DISABLE)
{
/* Enable the Interrupt source */
DFSDM1_0->FLTCR2 |= DFSDM_IT_CKAB;
}
else
{
/* Disable the Interrupt source */
DFSDM1_0->FLTCR2 &= ~(DFSDM_IT_CKAB);
}
}
else /* DFSDM2 */
{
if (NewState != DISABLE)
{
/* Enable the Interrupt source */
DFSDM2_0->FLTCR2 |= DFSDM_IT_CKAB;
}
else
{
/* Disable the Interrupt source */
DFSDM2_0->FLTCR2 &= ~(DFSDM_IT_CKAB);
}
}
}
/**
* @brief Enables or disables the Short Circuit Detector Interrupt.
* @param Instance: select the instance of DFSDM
* This parameter can be: 1 or 2.
* @param NewState: new state of the interrupt.
* This parameter can be: ENABLE or DISABLE.
* @retval None
*/
void DFSDM_ITShortCircuitDetectorCmd(uint32_t Instance, FunctionalState NewState)
{
/* Check the parameters */
assert_param(IS_FUNCTIONAL_STATE(NewState));
if(Instance == 1)
{
if (NewState != DISABLE)
{
/* Enable the Interrupt source */
DFSDM1_0->FLTCR2 |= DFSDM_IT_SCD;
}
else
{
/* Disable the Interrupt source */
DFSDM1_0->FLTCR2 &= ~(DFSDM_IT_SCD);
}
}
else /* DFSDM2 */
{
if (NewState != DISABLE)
{
/* Enable the Interrupt source */
DFSDM2_0->FLTCR2 |= DFSDM_IT_SCD;
}
else
{
/* Disable the Interrupt source */
DFSDM2_0->FLTCR2 &= ~(DFSDM_IT_SCD);
}
}
}
#endif /* STM32F413_423xx */
/**
* @brief Checks whether the specified DFSDM flag is set or not.
* @param DFSDMx: specifies the filter to be selected :
* This parameter can be one of the following values :
* @arg DFSDM1_0 : DFSDM 1 Filter 0
* @arg DFSDM1_1 : DFSDM 1 Filter 1
* @arg DFSDM2_0 : DFSDM 2 Filter 0 (available only for STM32F413_423xx devices)
* @arg DFSDM2_1 : DFSDM 2 Filter 1 (available only for STM32F413_423xx devices)
* @arg DFSDM2_2 : DFSDM 2 Filter 2 (available only for STM32F413_423xx devices)
* @arg DFSDM2_3 : DFSDM 2 Filter 3 (available only for STM32F413_423xx devices)
* @param LPT_FLAG: specifies the flag to check.
* This parameter can be any combination of the following values:
* @arg DFSDM_FLAG_JEOC: End of injected conversion Flag
* @arg DFSDM_FLAG_REOC: End of regular conversion Flag
* @arg DFSDM_FLAG_JOVR: Injected data overrun Flag
* @arg DFSDM_FLAG_ROVR: Regular data overrun Flag
* @arg DFSDM_FLAG_AWD: Analog watchdog Flag
* @arg DFSDM_FLAG_JCIP: Injected conversion in progress status
* @arg DFSDM_FLAG_RCIP: Regular conversion in progress status
* @retval None
*/
FlagStatus DFSDM_GetFlagStatus(DFSDM_Filter_TypeDef* DFSDMx, uint32_t DFSDM_FLAG)
{
ITStatus bitstatus = RESET;
/* Check the parameters */
assert_param(IS_DFSDM_ALL_FILTER(DFSDMx));
assert_param(IS_DFSDM_FLAG(DFSDM_FLAG));
if ((DFSDMx->FLTISR & DFSDM_FLAG) != RESET )
{
bitstatus = SET;
}
else
{
bitstatus = RESET;
}
return bitstatus;
}
#if defined(STM32F412xG)
/**
* @brief Checks whether the specified Clock Absence Channel flag is set or not.
* @param DFSDM_FLAG_CLKAbsence: specifies the flag to check.
* This parameter can be a value of @ref DFSDM_Clock_Absence_Flag_Definition
* @retval None
*/
FlagStatus DFSDM_GetClockAbsenceFlagStatus(uint32_t DFSDM_FLAG_CLKAbsence)
{
ITStatus bitstatus = RESET;
/* Check the parameters */
assert_param(IS_DFSDM_CLK_ABS_FLAG(DFSDM_FLAG_CLKAbsence));
if((DFSDM1_0->FLTISR & DFSDM_FLAG_CLKAbsence) != RESET)
{
bitstatus = SET;
}
else
{
bitstatus = RESET;
}
return bitstatus;
}
/**
* @brief Checks whether the specified Short Circuit Channel Detector flag is set or not.
* @param DFSDM_FLAG_SCD: specifies the flag to check.
* This parameter can be a value of @ref DFSDM_SCD_Flag_Definition
* @retval None
*/
FlagStatus DFSDM_GetShortCircuitFlagStatus(uint32_t DFSDM_FLAG_SCD)
{
ITStatus bitstatus = RESET;
/* Check the parameters */
assert_param(IS_DFSDM_SCD_FLAG(DFSDM_FLAG_SCD));
if ((DFSDM1_0->FLTISR & DFSDM_FLAG_SCD) != RESET)
{
bitstatus = SET;
}
else
{
bitstatus = RESET;
}
return bitstatus;
}
#endif /* STM32F412xG */
#if defined(STM32F413_423xx)
/**
* @brief Checks whether the specified Clock Absence Channel flag is set or not.
* @param Instance: select the instance of DFSDM
* This parameter can be: 1 or 2.
* @param DFSDM_FLAG_CLKAbsence: specifies the flag to check.
* This parameter can be a value of @ref DFSDM_Clock_Absence_Flag_Definition
* @retval None
*/
FlagStatus DFSDM_GetClockAbsenceFlagStatus(uint32_t Instance, uint32_t DFSDM_FLAG_CLKAbsence)
{
ITStatus bitstatus = RESET;
/* Check the parameters */
assert_param(IS_DFSDM_CLK_ABS_FLAG(DFSDM_FLAG_CLKAbsence));
if(Instance == 1)
{
if((DFSDM1_0->FLTISR & DFSDM_FLAG_CLKAbsence) != RESET)
{
bitstatus = SET;
}
else
{
bitstatus = RESET;
}
}
else /* DFSDM2 */
{
/* Check the parameters */
assert_param(IS_DFSDM_CLK_ABS_FLAG(DFSDM_FLAG_CLKAbsence));
if((DFSDM2_0->FLTISR & DFSDM_FLAG_CLKAbsence) != RESET)
{
bitstatus = SET;
}
else
{
bitstatus = RESET;
}
}
return bitstatus;
}
/**
* @brief Checks whether the specified Short Circuit Channel Detector flag is set or not.
* @param Instance: select the instance of DFSDM
* This parameter can be: 1 or 2.
* @param DFSDM_FLAG_SCD: specifies the flag to check.
* This parameter can be a value of @ref DFSDM_SCD_Flag_Definition
* @retval None
*/
FlagStatus DFSDM_GetShortCircuitFlagStatus(uint32_t Instance, uint32_t DFSDM_FLAG_SCD)
{
ITStatus bitstatus = RESET;
/* Check the parameters */
assert_param(IS_DFSDM_SCD_FLAG(DFSDM_FLAG_SCD));
if(Instance == 1)
{
if ((DFSDM1_0->FLTISR & DFSDM_FLAG_SCD) != RESET)
{
bitstatus = SET;
}
else
{
bitstatus = RESET;
}
}
else /* DFSDM2 */
{
if ((DFSDM2_0->FLTISR & DFSDM_FLAG_SCD) != RESET)
{
bitstatus = SET;
}
else
{
bitstatus = RESET;
}
}
return bitstatus;
}
#endif /* STM32F413_423xx */
/**
* @brief Checks whether the specified Watchdog threshold flag is set or not.
* @param DFSDMx: specifies the filter to be selected :
* This parameter can be one of the following values :
* @arg DFSDM1_0 : DFSDM 1 Filter 0
* @arg DFSDM1_1 : DFSDM 1 Filter 1
* @arg DFSDM2_0 : DFSDM 2 Filter 0 (available only for STM32F413_423xx devices)
* @arg DFSDM2_1 : DFSDM 2 Filter 1 (available only for STM32F413_423xx devices)
* @arg DFSDM2_2 : DFSDM 2 Filter 2 (available only for STM32F413_423xx devices)
* @arg DFSDM2_3 : DFSDM 2 Filter 3 (available only for STM32F413_423xx devices)
* @param DFSDM_AWDChannelx: where x can be a value from 0 to 7 to select the DFSDM Channel.
* @param DFSDM_Threshold: specifies the Threshold.
* This parameter can be a value of @ref DFSDM_Threshold_Selection.
* @retval None
*/
FlagStatus DFSDM_GetWatchdogFlagStatus(DFSDM_Filter_TypeDef* DFSDMx, uint32_t DFSDM_AWDChannelx, uint8_t DFSDM_Threshold)
{
ITStatus bitstatus = RESET;
/* Check the parameters */
assert_param(IS_DFSDM_ALL_FILTER(DFSDMx));
assert_param(IS_DFSDM_Threshold(DFSDM_Threshold));
assert_param(IS_DFSDM_AWD_CHANNEL(DFSDM_AWDChannelx));
if ((DFSDMx->FLTAWSR & ((DFSDM_AWDChannelx >> 16) << DFSDM_Threshold) ) != RESET)
{
bitstatus = SET;
}
else
{
bitstatus = RESET;
}
return bitstatus;
}
/**
* @brief Clears the DFSDMx's pending flag.
* @param DFSDMx: specifies the filter to be selected :
* This parameter can be one of the following values :
* @arg DFSDM1_0 : DFSDM 1 Filter 0
* @arg DFSDM1_1 : DFSDM 1 Filter 1
* @arg DFSDM2_0 : DFSDM 2 Filter 0 (available only for STM32F413_423xx devices)
* @arg DFSDM2_1 : DFSDM 2 Filter 1 (available only for STM32F413_423xx devices)
* @arg DFSDM2_2 : DFSDM 2 Filter 2 (available only for STM32F413_423xx devices)
* @arg DFSDM2_3 : DFSDM 2 Filter 3 (available only for STM32F413_423xx devices)
* @param DFSDM_CLEARF: specifies the pending bit to clear.
* This parameter can be any combination of the following values:
* @arg DFSDM_CLEARF_JOVR: Injected data overrun Clear Flag
* @arg DFSDM_CLEARF_ROVR: Regular data overrun Clear Flag
* @retval None
*/
void DFSDM_ClearFlag(DFSDM_Filter_TypeDef* DFSDMx, uint32_t DFSDM_CLEARF)
{
/* Check the parameters */
assert_param(IS_DFSDM_ALL_FILTER(DFSDMx));
assert_param(IS_DFSDM_CLEAR_FLAG(DFSDM_CLEARF));
/* Clear the pending Flag Bit */
DFSDMx->FLTICR |= DFSDM_CLEARF;
}
#if defined(STM32F412xG)
/**
* @brief Clears the DFSDMx's pending Clock Absence Channel flag.
* @param DFSDM_CLEARF_CLKAbsence: specifies the pending bit to clear.
* This parameter can be any combination of @ref DFSDM_Clear_ClockAbs_Flag_Definition
* @retval None
*/
void DFSDM_ClearClockAbsenceFlag(uint32_t DFSDM_CLEARF_CLKAbsence)
{
/* Check the parameters */
assert_param(IS_DFSDM_CLK_ABS_CLEARF(DFSDM_CLEARF_CLKAbsence));
/* Clear the IT pending Flag Bit */
DFSDM1_0->FLTICR |= DFSDM_CLEARF_CLKAbsence;
}
/**
* @brief Clears the DFSDMx's pending Short circuit Channel flag.
* @param DFSDM_CLEARF_SCD: specifies the pending bit to clear.
* This parameter can be any combination of @ref DFSDM_Clear_Short_Circuit_Flag_Definition
* @retval None
*/
void DFSDM_ClearShortCircuitFlag(uint32_t DFSDM_CLEARF_SCD)
{
/* Check the parameters */
assert_param(IS_DFSDM_SCD_CHANNEL_FLAG(DFSDM_CLEARF_SCD));
/* Clear the pending Flag Bit */
DFSDM1_0->FLTICR |= DFSDM_CLEARF_SCD;
}
#endif /* STM32F412xG */
#if defined(STM32F413_423xx)
/**
* @brief Clears the DFSDMx's pending Clock Absence Channel flag.
* @param Instance: select the instance of DFSDM
* This parameter can be: 1 or 2.
* @param DFSDM_CLEARF_CLKAbsence: specifies the pending bit to clear.
* This parameter can be any combination of @ref DFSDM_Clear_ClockAbs_Flag_Definition
* @retval None
*/
void DFSDM_ClearClockAbsenceFlag(uint32_t Instance, uint32_t DFSDM_CLEARF_CLKAbsence)
{
/* Check the parameters */
assert_param(IS_DFSDM_CLK_ABS_CLEARF(DFSDM_CLEARF_CLKAbsence));
if(Instance == 1)
{
/* Clear the IT pending Flag Bit */
DFSDM1_0->FLTICR |= DFSDM_CLEARF_CLKAbsence;
}
else /* DFSDM2 */
{
/* Clear the IT pending Flag Bit */
DFSDM2_0->FLTICR |= DFSDM_CLEARF_CLKAbsence;
}
}
/**
* @brief Clears the DFSDMx's pending Short circuit Channel flag.
* @param Instance: select the instance of DFSDM
* This parameter can be: 1 or 2.
* @param DFSDM_CLEARF_SCD: specifies the pending bit to clear.
* This parameter can be any combination of @ref DFSDM_Clear_Short_Circuit_Flag_Definition
* @retval None
*/
void DFSDM_ClearShortCircuitFlag(uint32_t Instance, uint32_t DFSDM_CLEARF_SCD)
{
/* Check the parameters */
assert_param(IS_DFSDM_SCD_CHANNEL_FLAG(DFSDM_CLEARF_SCD));
if(Instance == 1)
{
/* Clear the pending Flag Bit */
DFSDM1_0->FLTICR |= DFSDM_CLEARF_SCD;
}
else
{
/* Clear the pending Flag Bit */
DFSDM2_0->FLTICR |= DFSDM_CLEARF_SCD;
}
}
#endif /* STM32F413_423xx */
/**
* @brief Clears the DFSDMx's pending Analog watchdog Channel flag.
* @param DFSDMx: specifies the filter to be selected :
* This parameter can be one of the following values :
* @arg DFSDM1_0 : DFSDM 1 Filter 0
* @arg DFSDM1_1 : DFSDM 1 Filter 1
* @arg DFSDM2_0 : DFSDM 2 Filter 0 (available only for STM32F413_423xx devices)
* @arg DFSDM2_1 : DFSDM 2 Filter 1 (available only for STM32F413_423xx devices)
* @arg DFSDM2_2 : DFSDM 2 Filter 2 (available only for STM32F413_423xx devices)
* @arg DFSDM2_3 : DFSDM 2 Filter 3 (available only for STM32F413_423xx devices)
* @param DFSDM_AWDChannelx: where x can be a value from 0 to 7 to select the DFSDM Channel.
* @param DFSDM_Threshold: specifies the Threshold.
* This parameter can be a value of @ref DFSDM_Threshold_Selection.
* @retval None
*/
void DFSDM_ClearAnalogWatchdogFlag(DFSDM_Filter_TypeDef* DFSDMx, uint32_t DFSDM_AWDChannelx, uint8_t DFSDM_Threshold)
{
/* Check the parameters */
assert_param(IS_DFSDM_ALL_FILTER(DFSDMx));
assert_param(IS_DFSDM_Threshold(DFSDM_Threshold));
assert_param(IS_DFSDM_AWD_CHANNEL(DFSDM_AWDChannelx));
if ((DFSDMx->FLTAWSR & ((DFSDM_AWDChannelx >> 16) << DFSDM_Threshold) ) != RESET)
{
/* Clear the pending Flag Bit */
DFSDMx->FLTAWCFR |= (DFSDM_AWDChannelx >> 16) << DFSDM_Threshold;
}
}
/**
* @brief Check whether the specified DFSDM interrupt has occurred or not.
* @param DFSDMx: specifies the filter to be selected :
* This parameter can be one of the following values :
* @arg DFSDM1_0 : DFSDM 1 Filter 0
* @arg DFSDM1_1 : DFSDM 1 Filter 1
* @arg DFSDM2_0 : DFSDM 2 Filter 0 (available only for STM32F413_423xx devices)
* @arg DFSDM2_1 : DFSDM 2 Filter 1 (available only for STM32F413_423xx devices)
* @arg DFSDM2_2 : DFSDM 2 Filter 2 (available only for STM32F413_423xx devices)
* @arg DFSDM2_3 : DFSDM 2 Filter 3 (available only for STM32F413_423xx devices)
* @param DFSDM_IT: specifies the DFSDM interrupt source to check.
* @arg DFSDM_IT_JEOC: End of injected conversion Interrupt source
* @arg DFSDM_IT_REOC: End of regular conversion Interrupt source
* @arg DFSDM_IT_JOVR: Injected data overrun Interrupt source
* @arg DFSDM_IT_ROVR: Regular data overrun Interrupt source
* @arg DFSDM_IT_AWD : Analog watchdog Interrupt source
* @retval The new state of DFSDM_IT (SET or RESET).
*/
ITStatus DFSDM_GetITStatus(DFSDM_Filter_TypeDef* DFSDMx, uint32_t DFSDM_IT)
{
ITStatus bitstatus = RESET;
uint32_t itstatus = 0x0, itenable = 0x0;
/* Check the parameters */
assert_param(IS_DFSDM_ALL_FILTER(DFSDMx));
assert_param(IS_DFSDM_IT(DFSDM_IT));
/* Get the Interrupt Status bit value */
itstatus = DFSDMx->FLTISR & DFSDM_IT;
/* Check if the Interrupt is enabled */
itenable = DFSDMx->FLTCR2 & DFSDM_IT;
if ((itstatus != RESET) && (itenable != RESET))
{
bitstatus = SET;
}
else
{
bitstatus = RESET;
}
return bitstatus;
}
#if defined(STM32F412xG)
/**
* @brief Check whether the specified Clock Absence channel interrupt has occurred or not.
* @param DFSDM_IT_CLKAbsence: specifies on which channel check the interrupt source.
* This parameter can be a value of @ref DFSDM_Clock_Absence_Interrupt_Definition.
* @retval The new state of DFSDM_IT (SET or RESET).
* @note Clock absence interrupt is handled only by DFSDM0.
*/
ITStatus DFSDM_GetClockAbsenceITStatus(uint32_t DFSDM_IT_CLKAbsence)
{
ITStatus bitstatus = RESET;
uint32_t itstatus = 0x0, itenable = 0x0;
/* Check the parameters */
assert_param(IS_DFSDM_CLK_ABS_IT(DFSDM_IT_CLKAbsence));
/* Get the Interrupt Status bit value */
itstatus = DFSDM0->FLTISR & DFSDM_IT_CLKAbsence;
/* Check if the Interrupt is enabled */
itenable = DFSDM0->FLTCR2 & DFSDM_IT_CKAB;
if ((itstatus != RESET) && (itenable != RESET))
{
bitstatus = SET;
}
else
{
bitstatus = RESET;
}
return bitstatus;
}
/**
* @brief Check whether the specified Short Circuit channel interrupt has occurred or not.
* @param DFSDM_IT_SCR: specifies on which channel check the interrupt source.
* This parameter can be a value of @ref DFSDM_SCD_Interrupt_Definition.
* @retval The new state of DFSDM_IT (SET or RESET).
* @note Short circuit interrupt is handled only by DFSDM0.
*/
ITStatus DFSDM_GetShortCircuitITStatus(uint32_t DFSDM_IT_SCR)
{
ITStatus bitstatus = RESET;
uint32_t itstatus = 0x0, itenable = 0x0;
/* Check the parameters */
assert_param(IS_DFSDM_SCD_IT(DFSDM_IT_SCR));
/* Get the Interrupt Status bit value */
itstatus = DFSDM0->FLTISR & DFSDM_IT_SCR;
/* Check if the Interrupt is enabled */
itenable = DFSDM0->FLTCR2 & DFSDM_IT_SCD;
if ((itstatus != RESET) && (itenable != RESET))
{
bitstatus = SET;
}
else
{
bitstatus = RESET;
}
return bitstatus;
}
#endif /* STM32F412xG */
#if defined(STM32F413_423xx)
/**
* @brief Check whether the specified Clock Absence channel interrupt has occurred or not.
* @param Instance: select the instance of DFSDM
* This parameter can be: 1 or 2.
* @param DFSDM_IT_CLKAbsence: specifies on which channel check the interrupt source.
* This parameter can be a value of @ref DFSDM_Clock_Absence_Interrupt_Definition.
* @retval The new state of DFSDM_IT (SET or RESET).
* @note Clock absence interrupt is handled only by DFSDM0.
*/
ITStatus DFSDM_GetClockAbsenceITStatus(uint32_t Instance, uint32_t DFSDM_IT_CLKAbsence)
{
ITStatus bitstatus = RESET;
uint32_t itstatus = 0x0, itenable = 0x0;
/* Check the parameters */
assert_param(IS_DFSDM_CLK_ABS_IT(DFSDM_IT_CLKAbsence));
if(Instance == 1)
{
/* Get the Interrupt Status bit value */
itstatus = DFSDM1_0->FLTISR & DFSDM_IT_CLKAbsence;
/* Check if the Interrupt is enabled */
itenable = DFSDM1_0->FLTCR2 & DFSDM_IT_CKAB;
}
else
{
/* Get the Interrupt Status bit value */
itstatus = DFSDM2_0->FLTISR & DFSDM_IT_CLKAbsence;
/* Check if the Interrupt is enabled */
itenable = DFSDM1_0->FLTCR2 & DFSDM_IT_CKAB;
}
if ((itstatus != RESET) && (itenable != RESET))
{
bitstatus = SET;
}
else
{
bitstatus = RESET;
}
return bitstatus;
}
/**
* @brief Check whether the specified Short Circuit channel interrupt has occurred or not.
* @param Instance: select the instance of DFSDM
* This parameter can be: 1 or 2.
* @param DFSDM_IT_SCR: specifies on which channel check the interrupt source.
* This parameter can be a value of @ref DFSDM_SCD_Interrupt_Definition.
* @retval The new state of DFSDM_IT (SET or RESET).
* @note Short circuit interrupt is handled only by Filter 0.
*/
ITStatus DFSDM_GetShortCircuitITStatus(uint32_t Instance, uint32_t DFSDM_IT_SCR)
{
ITStatus bitstatus = RESET;
uint32_t itstatus = 0x0, itenable = 0x0;
/* Check the parameters */
assert_param(IS_DFSDM_SCD_IT(DFSDM_IT_SCR));
if(Instance == 1)
{
/* Get the Interrupt Status bit value */
itstatus = DFSDM1_0->FLTISR & DFSDM_IT_SCR;
/* Check if the Interrupt is enabled */
itenable = DFSDM1_0->FLTCR2 & DFSDM_IT_SCD;
}
else /* DFSDM2 */
{
/* Get the Interrupt Status bit value */
itstatus = DFSDM2_0->FLTISR & DFSDM_IT_SCR;
/* Check if the Interrupt is enabled */
itenable = DFSDM2_0->FLTCR2 & DFSDM_IT_SCD;
}
if ((itstatus != RESET) && (itenable != RESET))
{
bitstatus = SET;
}
else
{
bitstatus = RESET;
}
return bitstatus;
}
#endif /* STM32F413_423xx */
/**
* @}
*/
/**
* @}
*/
#endif /* STM32F412xG || STM32F413_423xx */
/**
* @}
*/
/**
* @}
*/